My Range Igniters Clicks Constantly: What To Do?

March 16, 2022

GE Monogram Appliance Repair Service Downey | GE Monogram Inc Repair

Home » Tips » My Range Igniters Clicks Constantly: What To Do?

 

 

GE ranges are well-made and dependable, with remarkable features across the board, even in lower-priced versions, making them a good first choice when replacing your old range. You can read more GE Monogram ranges reviews if you require more convincing.

Click, Click, Click, Click, Click…

You’re undoubtedly familiar with this sound if you have a gas stove or cooktop. Turn the knob to the on position, hear a few clicks, and the burner ignites. Everything is fine. However, what should you do if you hear the igniters clicking after the burner is switched off? There are a few possible explanations for why your igniters click after switching off the burner. It might be caused by a malfunctioning switch, skewed burner caps, filthy igniters, or dampness surrounding the igniters.

If your stove or cooktop igniters continue to click after the burner is switched off, they may need to be cleaned. This is one of the most typical reasons for a persistent clicking sound. Food debris might become trapped around the ignition system if your cooking becomes a little sloppy at times. This filth will cause the system to malfunction, resulting in the igniter clicking when it is turned off.

Do-it-yourself range repairs are simple; in fact, 91 percent of our customer’s rate stove repairs as “easy” or “really easy.” All you have to do is use a toothbrush or other small scrubber to extract/dislodge food. You may clean around the burner, under knobs, and around the igniter. You may also use a Q-Tip submerged in alcohol to get rid of the last little bits of buildup.

When the stove or cooktop is turned off, moisture might leak into the region where the igniter is located, causing it to click. Moisture on the switches might be the source of the problem. Aggressive cleaning is another source of moisture. If you recently cleaned your stove, you may have allowed too much water or cleaning solution to leak into the igniter system. Remove knobs and burner caps, absorb moisture with a paper towel, and allow everything to air out for a few hours.

If you clean and dry your knobs and igniter area but still hear the tell-tale click of igniters after the burner is switched off, it might be due to faulty parts. You can buy the component and change it yourself if you’re handy. The part in question might be one of the following: 

  • Spark Module
  • Ignition Switch Spark
  • Ignitor

If you’d rather not tamper with stove or cooktop parts, contact a qualified range repair company, GE Monogram Inc Repair, and avail of GE Monogram range repair.

How do I clean Monogram ranges?

Looking for a solution to the subject,How do I clean Monogram ranges?”

We have gathered the most accurate and comprehensive information on this page to fully answer the question: How do you clean a GE monogram range?

GE Appliances recommends Bar Keepers Friend or a vinegar-and-baking-soda solution. It is critical to remove these cleansers before using the range. You may also clean your range manually by using home techniques.

Cleaning your range as soon as you spill is the greatest method to ensure that your home warranty will cover your range. When a spill happens, sprinkling salt right on it can help absorb moisture and make cleanup easier. Here are some recommendations for cleaning an unclean range, but first, make sure you know what kind of range you’re cleaning.

Electrical Range VS. Gas Range

You should always make sure that your range is not hot and turned off. To clean the ranges, unplug from the power source. Never immerse a burner in water. Instead, use a moist towel to clean them. Clean the drip pans in the dishwasher, or soak them in a combination of baking soda and water for at least 8 hours to remove any food particles. Remove the grill covers from the gas ranges. In the sink, wash them with dish soap and water. Using a cloth dipped in vinegar, clean the surface. You may use a high-concentrate vinegar and damp cloth. The cleaner should not be sprayed directly on the burners.

Even if you clean up every spill, you should still do regular deep cleaning and maintenance on your range, especially if you have a home warranty plan. If you think that your range requires more than just cleaning, contact GE Monogram Inc Repair to avail of GE Monogram Inc Appliance Repair in Los Angeles.

Contact Us

If you are an owner of a GE Monogram Range that needs repair or cleaning and you're located in the Los Angeles area, we have good news for you! Call our GE Monogram Inc Repair right away and have your GE range up and running again in no time.